N90 is a model family and market designation, not a universal specification. Confirm the actual machine, its nameplate and the quoted configuration before planning power, space or output.
N90 Rice Mill & NMJ120 Grain Peeler
- Product options
- N90 rice mill / NMJ120 grain peeler
- NMJ120 process
- Abrasive grain peeling
- NMJ120 materials
- Maize, sorghum, millet, wheat and barley
- Drive selection
- Electric motor or diesel configuration; specify in your enquiry
The 120-type figures apply to NMJ120 only. N90 motor, dimensions and throughput are confirmed separately in your quotation.
Choose configuration & get a quote6LN-15/15 Combined Rice Mill
- Model family
- 6LN-15/15
- Configurations
- 6LN-15/15DJ / A / B / C
- Input material
- Paddy
- Process
- Husking and rice milling
- Power and dimensions
- Specified with the selected configuration
Choose the exact variant before sizing the power supply and installation space. Request its matching specification sheet with your quotation.
Choose configuration & get a quote6N40-9F21 Rice Mill & Grain Grinder
- Combined model
- 6N40-9F21
- Rice milling productivity
- ≥160 kg/h
- Grinding productivity
- ≥180 kg/h
- Rice milling drum speed
- 1,860 r/min
- Grinding rotor speed
- 4,800 r/min
- Combined-unit overall length / height
- 130 cm / 112 cm
- Combined-unit frame footprint
- 66 × 30 cm
- Electrical supply
- 220 V; confirm motor phase and frequency
Productivity figures describe the combined unit. The diagram specifies a 2.2 kW reference motor; the motor-included variants offer 2.6 kW. Select the required package before ordering.
Choose configuration & get a quoteHB15/15 Compact Rice Milling Line
- Model
- HB15/15 (HB15-15)
- Output, depending on paddy
- 600–800 kg/h
- Total motor power
- 19.75 kW
- Motor count
- 5
- Machine weight
- 1,090 kg
- Packing dimensions
- 2,250 × 1,450 × 2,250 mm
- Process stages
- Feeding → destoning → husking → separation → abrasive milling
- Optional equipment
- Rice-husk grinder
- Electrical supply
- Confirm voltage, phase and frequency for the installation
Use the technical-sheet output of 600–800 kg/h for planning. Daily output depends on operating hours and paddy condition. Final equipment scope and electrical requirements are confirmed in the quotation.
Choose configuration & get a quote6N40-9F21 Multifunction Rice Mill & Grinder
- Model
- 6N40-9F21
- Processing sections
- Rice mill and grain grinder
- Rice milling productivity
- ≥160 kg/h
- Grinding productivity
- ≥180 kg/h
- Rice milling drum speed
- 1,860 r/min
- Grinding rotor speed
- 4,800 r/min
- Motor package
- 2.6 kW copper-wound motor
- Electrical supply
- 220 V; confirm motor phase and frequency
The listing and configuration diagrams show different dimensions and weights. Select the exact package and confirm its final specification, electrical supply and shipping data in the quotation.
Choose configuration & get a quoteRated capacity and working capacity
A supplier rating is a reference under stated conditions. Your working capacity depends on paddy variety, moisture, wear, feed rate, power and the rice quality you accept. Ask whether a throughput figure measures paddy input or finished-rice output. They are not interchangeable.
Motor and drive requirements
Ask for the motor rating, voltage, phase, frequency and rated speed in writing. A qualified installer should check the site supply, protective devices, earthing and drive alignment. Do not choose a motor or pulley ratio from the model name alone.
Diesel compatibility
Some belt-driven arrangements can be configured around an engine. Compatibility, engine power, mounting, pulley ratio and guarding must be confirmed for the exact machine. Do not assume every N90 can take the same diesel engine.
Dimensions, weight and installation
Confirm packed and unpacked dimensions separately. Leave space for feed handling, rice collection, maintenance access, guards and dust management. Foundation and anchoring requirements come from the specific machine instructions.
How to confirm your N90 version
Send a full machine photo, readable nameplate and photos of the drive, milling chamber and old components. Include measured part dimensions. A similar-looking machine may have different screens, shafts or bolt patterns.